So, I’ve been shaving with shaving oil and safety razors for a while now and decided that it’s time I help my fellow geeks by spreading some knowledge about this method (which is saddly still poorly documented online). Much of the below method is hacks assembled together from different sources and lots of trial and error.
Why shave with oil and DE safety razors
First of all, shaving with oldskool DE razors is not as much about being hip and trendy as it is about optimising. Although, I have to admit, it is still looks pretty cool ☺
There are several reasons why shaving with oil and DE razors beats modern foam and system multiblade razors hands down:
- they’ve got multiple uses — shaving oil replaces both the shaving foam/soap and aftershave (and pre-shaving balm); DE razors are used in tools and well, they’re proper blades for crying out loud!;
- the whole set takes a lot less space when traveling — one razor, a puny pack of blades and a few ten ml of oil is all you need to carry around);
- you get a better shave — once you start shaving properly, you get less burns and cutticles and a smoother shave as well;
- it’s more ecological — the DE blades have less different materials and are easier to recycle, all shaving oils I found so far are Eco certified;
- and last, but not least in these days, it’s waaaaaaay cheaper — (more on that in a future blog post).
History and experience (skip if you’re not interested in such bla bla)
I got my first shaving oil about two years ago, when I started to travel more. My wonderful girlfriend bought it for me, because a 30 ml flask took a lot less space then a tin of shaving foam and a flask aftershave. The logic behind this decision was:
“well, all the ancient people managed to have clean shaves with oil, my beard can’t be that much different then in the past”
And, boy, was I in for a nice surprise!
I used to get inflamations, pimples and in-grown hair quite often, so I never shaved very close — but when shaving with oil, there was none of that! After one or two months of of trial and error with different methods and own ideas, I finally figured out how to properly use it and left the shaving soaps, gels and foams for good.
As I shaved for a while with oil I noticed that all “regular modern” system multiblade razors have strips of an aloe vera gel, that works well with shaving foam, gels and soap; but occasionally stick to your face if you’re using shaving oil. This is true for as many or as little blades in the razor heads as possible. — I just couldn’t find razors without it.
That’s why I started thinking about the classic DE safety razors and eventually got a plastic Wilkinson Sword Classic for a bit over 5 €. Surprisingly, after just a few miniscule cuts, the improvement over the system multiblade razors got quite apparent. I haven’t touched my old Gillette Mach3 ever since. The Wilkinson Sword Classic is by far not a very good DE razor, but it’s cheap and easy to use for beginners. But if you decide you like this kind of shave, I would warmly recommend that you upgrade to a better one.
For example recently I got myself a nice Edwin Jagger razor with their DE8 head and I love it. It’s full-metal, chromed, closed-comb razor, which means it has another bar below the blade, so it’s easier and safer to use then an more agressive open-comb version.
How to Shave with oil and DE razors
OK, first of all, don’t panic! — they’re called “safety razors” for a reason. As opposed to the straight razors, the blade is enclosed, so even if you manage to cut yourself, you can’t get a deep cut. This is truer still for closed-comb razors.
- Wash your face to remove dead skin and fat. It’s the best if you shave just after taking a shower.
- Get moisture into the hairs. Beard hair is hard as copper wire while it is dry; but wet, it’s quite soft. The best way is to apply a towel soaked in very hot water for a few (times per) ten seconds to your face — the hot water also opens up the pores. If you are traveling and don’t have hot water, just make sure those hairs are wet. As it’s a good idea to have your razor up to temperature as well, I usually put hot water in the basin and leave the razor in it while I towel my face.
- Put a few drops of shaving oil into the palm of your hand (5-6 is enough for me) and with two fingers apply it to all the places on your face that you want to shave.
- Splash some more (hot) water on your face — the fact that water and oil don’t mix well is the reason why your blade glides so fine. Also during the shave, whenever feel your razor doesn’t glide that well anymore, usually just applying some water is enough to fix it.
- First shave in the direction of the grain — to get a feeling for the right angle, take the handle of the razor in your fingers and lean the flat of the head onto your cheek, so the handle is 90° to your cheek; then reduce the angle until you get to a position where shaving feels comfortable. Also it’s easier to shave moving your whole arm then just the wrist. Important: DO NOT apply pressure — the safety razors expose enough blade that with a well ballanced razor just the weight of the head produces almost enough pressure for a good shave (as opposed to sytem multiblade razors). Pull in the direction of the handle with slow strokes — on thicker beard you will need to make shorter strokes then on less thick beard. To get a better shave, make sure to stretch your skin where you currently shave. If the razor gets stuck with hair and oil, just swish it around in the water to clean it.
- Splash your face with (hot) water again and now shave accross the grain. This gives you a closer shave
- Splash your face with cold water to get rid of any hair remains and to close the pores. Get a drop or two of shaving oil and a few drops of water into your palm and mix it with two fingers. Rub the oil-water mixture into your face instead of using after-shave and leave your face to dry — the essential oils in the shaving oil enriches and dezinfects your skin.
- Clean your razor under running water to remove hair and oil and towel-dry it (don’t rub the blade!). When I take it apart to change blades, I clean the razor with water and rub it with the towel, to keep it shiney.
Enjoy shaving ☺
It is a tiny bit more work then shaving with system multiblade razors, but it’s well worth it! For me the combination of quality DE safety razors and shaving oil, turned shaving from a bothersome chore into a morning ritual I look forward to.
…and in time, I’m sure you’ll find (and share) your own method as well.
Update: I just stumbled upon this great blog post “How Intellectual Property Destroyed Men’s Shaving” and thought it be great to mention here.
hook out → see you well shaven at Akademy ;) more